This article talks about fixing the TP-Link repeater orange light issue. If you are facing this problem with your wireless range extender, it is advised that you check out the hacks mentioned in this post. They will surely be able to help you convert the blinking orange LED on your device to the green.
Resolved: TP-Link Repeater Orange Light Issue
- Reboot Your TP-Link Repeater
The most basic way to get rid of the TP-Link repeater orange light issue is to reboot your wireless device. Here’s how to reboot your TP-Link wireless repeater:
- Disconnect your repeater from your home router.
- Power off your TP-Link repeater and unplug it from its wall socket.
- Wait for about a minute or two.
- Plug your repeater back into its wall socket and turn it on.
- Reconnect your extender and your home router.
Once you are done rebooting your TP-Link wireless repeater, try to access the tplinkrepeater.net login page. Are you able to? No? Well, it looks like you are still stuck with the TP-Link repeater orange light issue. Continue reading.
- Change the Connection Source
Chances are that you have connected your TP-Link wireless repeater and your home router with the help of a wireless source. And that is exactly what you should not have done.
Therefore, switch to a different connection source to connect your devices, i.e. wired. Just make sure that the wire connecting your repeater and router is not worn out.
- Move Your WiFi Devices Closer
Too much distance between your WiFi devices can also cause the TP-Link repeater orange light issue. Therefore, unplug your repeater from the wall socket that it is currently plugged into and plug it into the one located near your home router.
Just keep in mind, do not place your devices too close to each other. Otherwise, their WiFi signals might clash and lead you to further technical issues in the future.
- Perform TP-Link Firmware Upgrade
You can also try to update the firmware of your wireless device in order to get rid of the TP-Link repeater orange light issue.
Walk through the instructions given below and get to know how to update the firmware of your repeater to the latest version with ease:
- Switch on your PC and get access to your favorite internet browser.
- Download the latest firmware version and then, extract the file.
- Open a new tab.
- In the address bar of the browser, type http://tplinkrepeater.net and press Enter.
- You will reach the official login page of your TP-Link repeater.
- When asked, input the default username and password.
- Click the Log In button.
- Once you have reached the Quick Setup wizard, go to the Settings section.
- Select System Tools > Firmware Upgrade.
- Thereafter, click Browse.
- At last, hit Upload.
In some time, the firmware of your TP-Link wireless repeater will get updated to the latest version. In case you come across any issues while updating your device using this method, opt for the Tether app to execute the same process.
- Reset Your TP-Link Repeater
If you are still going nuts because of the TP-Link repeater orange light issue, then it is high time that you restore your device to the factory default settings.
Resetting your repeater is not rocket science. However, a lot of users get stuck during the process. To ensure that you don’t face any difficulty while resetting your device, we have mentioned some simple steps below:
- Locate the Reset button on your TP-Link extender.
- Once located, carefully press it.
- Hold on for some time.
As soon as you are done resetting your TP-Link wireless repeater, it is advised that you reconfigure it using the TP Link app.
The Bottom Line
With that, we are wrapping up our guide on troubleshooting the TP-Link repeater orange light issue. Let us hope that after walking through the hacks given above, you will be able to convert orange LED on your device to green.
In case you are acquainted with any other hack through which this issue can be resolved, do share it with your fellow readers. They will surely like to learn about something new.