Netgear Extender Not Working After Firmware Update? Let’s Fix!

In order to add new features to the Netgear extender and fix bugs and errors, users perform firmware update. But, it can be irritating if the firmware update itself becomes trouble. It is reported that many users face the problem of the Netgear extender not working after updating its firmware. If you are also facing the same issue, then we’ve got your back. Here, we will reveal various troubleshooting tactics that will help you get rid of the issue within a matter of minutes. So, read on.

Fixed: Extender Not Working After Firmware Update

  1. Reboot Your Netgear Extender

Being a technical device, a Netgear extender is prone to technical glitches. Probably, your extender is endeavoring with the same that is not allowing it to function properly after firmware update. Well, in that case, we highly recommend you reboot the Netgear extender. Doing so will resolve all the technical glitches your extender might be dealing with.

Here are the steps that you should follow to reboot your Netgear wireless extender:

  • Switch off your Netgear extender.
  • Let your wireless device stay idle for a while.
  • Power up your Netgear extender again and check if it is functioning or not.

If not, then it is time to give the next troubleshooting hack a try.

  1. Check the Internet Access

Check if your Netgear extender has access to the internet. For this, first of all, verify the wired connection between your Netgear extender and router. If the connection is finger-tight and the Ethernet cable is also in working condition, chances are that your Internet Service Provider is the one at fault.

So, without any delay, contact your Internet Service Provider and confirm if there is an internet issue in your area. If it is, then wait until he fixes the issue.

  1. Check the Firmware Version

Downloading the wrong firmware is one of the most common mistakes committed by Netgear users while updating the firmware of their extender. Doing so can also lead to the ‘Netgear extender not working after firmware update’ issue. So, access the Netgear extender setup wizard and check the firmware version you downloaded.

If you have mistakenly downloaded the wrong firmware version, then you need to perform Netgear extender firmware update again. So, follow the steps mentioned below to upgrade the firmware for your WiFi device:

How to Perform Netgear Firmware Update?

  • Turn on your wireless range extender by connecting it to a working wall outlet.
  • As soon as the power LED on your extender turns green, make a secure connection between your WiFi devices using an Ethernet cable.
  • Switch on your PC.
  • Open a web browser like Google Chrome, Apple Safari, Mozilla Firefox, Microsoft Edge, etc. Make sure that whatever web browser you are using is updated and free of cache, cookies, and browsing history.
  • Download the firmware update file for your Netgear wireless extender and save it on your PC.
  • Now, open a new tab.
  • Go to the address bar and type mywifiext.net in it.
  • Press the Enter key.

Note: You can also access the Netgear extender login page using the 192.168.1.250 IP address.

  • The Netgear extender login page will come into view prompting you to enter the default username and password.
  • Fill in the default login details into the required fields. If you have ever changed the login credentials in the past, consider using them. But, make sure to avoid the typing mistake while entering login details.
  • Click the Log In button.
  • You will get redirected to the Netgear extender setup wizard.
  • Head over to the Firmware Update option.
  • Look for the firmware update file you’ve downloaded and upload it.

In this way, you can update the firmware of your WiFi device without any hassle.

Summing Up

These were the troubleshooting hacks that can help you get rid of the ‘Netgear extender not working after firmware update’ issue. We hope that you’ll be able to fix the issue and make your extender functional again.

Leave a Comment